Basic Setup for Your WeMo Light Switch
The Wemo Wi-Fi Smart Light Switch provides a great way to control your home's lights when you're away from home or just relaxing on the couch.
Turn on your home's lights as you return from a night out, off as you head to bed, or simply give your house that lived-in look while away on vacation.
This guide will walk you through setting up the software and the general use of the switch itself.
? Is the Light Switch already installed in your wall?
The Wemo Wi-Fi Smart Light Switch provides a great way to control your home's lights when you're away from home or just relaxing on the couch.
Turn on your home's lights as you return from a night out, off as you head to bed, or simply give your house that lived-in look while away on vacation.
This guide will walk you through setting up the software and the general use of the switch itself.
- Launch the Play Store on your smartphone.
- Select the search bar at the top.
- Type in WeMo, then select WeMo from the list.
- Select Install.
- Select Open to open the app.
In order to setup your Wemo Light Switch, you must first connect to the special network provided by the switch for setup.
- Open Settings on your phone or tablet.
- Select Wi-Fi.
- In the list of Wi-Fi networks, you should see one that starts with "WeMo", then a product type, and a number. It will not be locked with a password. Select the WeMo network.
- You will not be prompted for a password, your device will simply connect immediately to the network, and show that you are connected.
The network password for your normal home Wi-Fi connection has not been forgotten. Once setup, your phone will automatically reconnect to the proper network.
- Open the WeMo app.
- The app will start up.
- Select Let's get started.
- Select your WeMo device from the list.
- A short help message will open, detailing the next steps. Select the X at the bottom right when you're ready to continue.
- A screen confirming your device will show up. Select Next.
- Your phone will send the Wi-Fi settings based on your last connection and location.
- Your WeMo device is fully setup, and ready to use!
- Open the App Store.
- Select Search in the bottom right corner.
- Select Get for WeMo.
- Select Open.
- Open Settings on your phone or tablet.
- Select Wi-Fi.
- Make sure Wi-Fi is turned on, then select the WeMo Wi-Fi network from the list.
The network password for your normal home Wi-Fi connection has not been forgotten. Once setup, your phone will automatically reconnect to the proper network.
Installation of the Wemo Light Switch involves opening up your existing light switch, disconnecting, then reconnecting those wires to the Wemo Light Switch.
Improper preparations, care, and handling of your home's internal wiring can result in damage and destruction to your property, as well as severe injury and death to you.
It is recommended to contact a professional, licensed electrician in your area to ensure your Wemo Light Switch is properly installed, safely.
If you are familiar with basic electrical work wish to install it yourself, instructions and how-to videos are available on the product manufacturer's web page at http://www.belkin.com/us/support-article?articleNum=8185.
Return to this guide after you have your Wemo Wi-Fi Smart Light Switch installed.