Connect Your Canon EOS Rebel T6 Camera to Wi-Fi

• Wireless Network Name (SSID)
• Wireless Network Key (Password)

Finding Network Credentials

Most wireless routers/gateways have a label with the default credentials. If the credentials aren't there, look in the devices documentation.

If your Internet Service Provider (ISP) installed the wireless router or gateway, they might have left you a setup sheet which may have the credentials.

1. Push the Menu button.
   
2. Select Settings 3 > Wi-Fi function.
   
3. Select the function you'd like to perform with the connection.
   
   
   • Camera - Transfer to a compatible camera
   • Phone - Transfer to a smartphone
   • Printer - Print on a compatible printer
   • Web - Transfer to a web service
4. Choose Select a network > OK.
   
5. Select your network from the list.
   
6. Enter your network password, then push the Menu button.
   
7. Select Auto Setting > OK.
   

If other wireless devices are connected to the network and functioning properly, chances are the router is OK. It's possible there is an environmental issue. Do you have a portable wireless device (Smart Phone, Tablet, Laptop, etc.) that you can put in the same area to test and see if that device's wireless connection still functions as intended in that location?

The device needs to be within a reasonable range of the router in order to connect and have the best connection speeds.

• In general, in most homes, you can be up to 30 feet from your router for a decent connection.
• From 30' to 50' away, the speeds will be slower, and may drop occasionally, but it should be usable.
• Greater than 50' away, and the signal will most likely be too weak to overcome interference. The speeds will be slow, and the connection may be sporadic.

The above numbers are approximates only. Optimal range may vary based on router make and model.

Your router may need to be relocated to a more centralized location in order to provide better coverage for all your devices.

Good Placement

Bad Placement