How to Check Connection D-Link DAP1650 WiFi Repeater
Authored by: Support.com Tech Pro Team
1. Introduction
In This Guide
You'll Learn:
- How to check the network status of your D-Link Range Extender.
You'll Need:
- To be by your range extender or have a computer on hand.
2. Check Status
You can check the status of your D-Link DAP-1650 AC1200 Range Extender in one of two ways:
- On the device itself,
- On a computer.
The type and amount of network related information that you get depends on which method you use.
On Your Range Extender
- The indicator lights on the D-Link DAP-1650 AC1200 Wi-Fi range extender have the following meanings:
- Power LED (1):
- Solid Green
- On and functioning properly.
- Blinking Green
- WPS has been pushed and searching for signal.
- Solid Orange
- Device is booting up.
- Blinking Orange
- Device is in recovery mode.
- Internet LED (2):
- Solid Green
- Successfully connected.
- Blinking Orange
- A firmware upgrade is in progress.
- Off
- Device is being factory reset.
On Your Computer
- Launch the browser that you use to go online.
- Navigate to http://dlinkap.local and login with the admin password set on your range extender.
- The Status tab will display the status or your range extender.
- The status will show the range extender's connection to the router.