How to Check Connection Linksys RE6350 WiFi Repeater
Authored by:
Support.com Tech Pro Team
This Guided Path® was written and reviewed by Support.com’s Tech Pro team. With decades of experience, our Tech Pros are passionate about making technology work for you. We love feedback! Let us know what you think about this Guided Path® by rating it at the end.
Introduction
- How to check the network status of your Linksys Range Extender.
- To be by your range extender or have a computer on hand.
1 Check Status
You can check the status of your Linksys RE6350 Range Extender in two ways:
- On the device itself
- On a computer or mobile device using a web browser
The type and amount of network related information that you get depends on which method you use.
On Your Range Extender
- Check the indicator light on the front of the range extender:
Off Range Extender isn't getting power, or is turned off.
Solid Green Turned on, with good signal strength.
Blinking Green Booting up or updating firmware.
Blinking Orange Ready for setup or not connected.
Solid Orange Signal is weak from your router to the Range Extender. Move the Range Extender closer to the router.
On Your Computer
- Launch the web browser that you use to surf the web.
- Navigate to one of the following addresses:
- extender.linksys.com
- If you know the IP address assigned to your range extender you can enter that instead.
This is an example IP address and will likely not match the one your range extender has.
- Enter the password when requested.
The default password is "admin".
- Under Wireless, click on Basic Settings.
- Your network status will be displayed here.
- The status will show the range extender's connection to the router.
Was this content helpful?
YesNoRelated articles
How to Use a Linksys RE9000 AC3000 WiFi Repeater
How to Check Connection Linksys RE9000 WiFi Repeater
How to Factory Reset a Linksys RE6350 WiFi Repeater
What do Lights Mean on Linksys RE6350 WiFi Repeater
How to Use a Linksys RE6350 AC1200 WiFi Repeater
How to Set Up a Linksys RE6350 AC1200 WiFi Repeater
- How to check the network status of your Linksys Range Extender.
- To be by your range extender or have a computer on hand.
You can check the status of your Linksys RE6350 Range Extender in two ways:
- On the device itself
- On a computer or mobile device using a web browser
The type and amount of network related information that you get depends on which method you use.
On Your Range Extender
- Check the indicator light on the front of the range extender:
Off Range Extender isn't getting power, or is turned off.
Solid Green Turned on, with good signal strength.
Blinking Green Booting up or updating firmware.
Blinking Orange Ready for setup or not connected.
Solid Orange Signal is weak from your router to the Range Extender. Move the Range Extender closer to the router.
On Your Computer
- Launch the web browser that you use to surf the web.
- Navigate to one of the following addresses:
- extender.linksys.com
- If you know the IP address assigned to your range extender you can enter that instead.
This is an example IP address and will likely not match the one your range extender has.
- Enter the password when requested.
The default password is "admin".
- Under Wireless, click on Basic Settings.
- Your network status will be displayed here.
- The status will show the range extender's connection to the router.