How to Connect Acer One 10 to WiFi

Authored by: Support.com Tech Pro Team

1. Credentials

In order to connect to a wireless network, you must have the required credentials. These are:

Wireless Network Name (SSID)
Wireless Network Key (Password)

Finding Network Credentials

Most wireless routers/gateways have a label with the default credentials. If the credentials aren't there, look in the devices documentation.

Default Wi-Fi credentials highlighted on router/gateway sticker.

If your Internet Service Provider (ISP) installed the wireless router or gateway, they might have left you a setup sheet which may have the credentials.

2. Connect to Wi-Fi

Click on the Notifications icon and then click on Network.

notification center open with notifications icon and network highlighted

Click the network you wish to connect to.

available networks with an example network selected

Choose if you wish to automatically connect to your network, and then click on Connect.

selected network listed with connect automatically box and the connect button highlighted

Enter in your security key and click Next.

Security key field with next highlighted

Choose whether or not you want to be visible to the network.

Do you want your computer to be discoverable with yes and no boxes highlighted

It is recommended to allow your PC to be discovered on private home networks because that allows you to see other wireless devices on the Network. If you're at a public location it is suggested to select "No".
You can verify your connection by checking to see if it now says "Connected" next to the network.

Notification showing you are now connected to Wi-Fi

3. Check Other Devices

To help troubleshoot the problem we should check if other devices can connect to the wireless network.

4. Check Environment

If other wireless devices are connected to the network and functioning properly, chances are the router is OK. It's possible there is an environmental issue. Do you have a portable wireless device (Smart Phone, Tablet, Laptop, etc.) that you can put in the same area to test and see if that device's wireless connection still functions as intended in that location?

5. Power cycle

If you haven't already, please try power cycling the device you're working with. To do so, simply turn it off, wait 30 seconds and turn it back on again.

6. Incompatible Routers

At this time, the manufacturer has not indicated that there are any compatibility issues with specific models of networking equipment on the market. To ensure that your specific networking equipment and all settings will work properly with your PC or tablet, please reach out to the manufacturer directly for further assistance.

Some wireless routers broadcast a dual-band wireless signal and provide both 2.4GHz and 5GHz wireless networks. Your device may not see the 5GHz network, which is completely normal. Not all devices contain the antenna to communicate on the 5GHz band. Also, some routers broadcast guest networks that your device may not be able to connect to depending on your router's settings.

7. Guided Path not helpful.

8. Escalate to PTE

If you are a PST, follow the Escalation Process to PTE.

9. What's next?

10. It Can't Happen Here

It Can't Happen Here

11. Range Check

The device needs to be within a reasonable range of the router in order to connect and have the best connection speeds.

In general, in most homes, you can be up to 30 feet from your router for a decent connection.
From 30' to 50' away, the speeds will be slower, and may drop occasionally, but it should be usable.
Greater than 50' away, and the signal will most likely be too weak to overcome interference. The speeds will be slow, and the connection may be sporadic.

The above numbers are approximates only. Optimal range may vary based on router make and model.

12. Guided Path not helpful.

13. Escalate to PTE

If you are a PST, follow the Escalation Process to PTE.

14. What's next?

15. It Can't Happen Here

It Can't Happen Here

16. Relocate Router Check

Your router may need to be relocated to a more centralized location in order to provide better coverage for all your devices.

Good Placement

A house, separated into rooms detailing how placing Wi-Fi in the center of a house will provide better coverage to reach all devices. Diagram.

Bad Placement

A house, separated into rooms detailing how placing Wi-Fi in the corner of the house can cause some devices to not have a Wi-Fi signal. Diagram.

17. Router Relocation

Since this appears to be a range issue that can be resolved by putting the router in closer proximity to the device's intended use area, we recommend moving the router to a more centralized location.

18. Range Extender

If wireless signal is not reaching your device, and relocating your router or the device itself to be in closer proximity is not possible or doesn't resolve the issue, a great way to boost wireless signal without replacing existing equipment is to acquire and install a range extender. Range extenders work with your existing wireless router as a type of wireless repeater used to expand the reach of wireless signal in your home.