How to Connect Pioneer VSXLX102 to WiFi

Authored by: Support.com Tech Pro Team

1. Introduction

The Pioneer VSX-LX102 is a 7.2-channel receiver with elite upscaling and pass-through capabilities as well as all the important audio decoders used by DVDs, Blu-rays and streaming services.

Pioneer VSX-LX102.

This guide will walk you though the following topics:

  • Connect your unit to Wi-Fi
  • Troubleshoot potential issues connecting your unit to Wi-Fi

2. Credentials

In order to connect to a wireless network, you must have the required credentials. These are:

  • Wireless Network Name (SSID)
  • Wireless Network Key (Password)

Finding Network Credentials

Most wireless routers/gateways have a label with the default credentials. If the credentials aren't there, look in the devices documentation.

Default Wi-Fi credentials highlighted on router/gateway sticker.

If your Internet Service Provider (ISP) installed the wireless router or gateway, they might have left you a setup sheet which may have the credentials.

3. Connect via Wi-Fi

  1. Press the Home button on the remote control.
Home button highlighted on remote control.
  1. Using the arrow buttons, select Network Bluetooth then press Enter.
Network/Bluetooth option highlighted in Home menu.
  1. Navigate the settings using the Up and Down arrows and change their values using the Left and Right arrows.
  2. Make sure that WiFi is set to On and DHCP is set to Enable.
  3. Navigate to WiFi Setup and press Enter on the remote
  4. For the connection method select Scan Network, then follow the on screen instructions.
  5. You will need to select a WiFi network and type in its WiFi password if required.

You can check your connection information by doing the following:

  • Navigate to WiFi status to see the currently connected network
  • Navigate to Network Check to test your internet connection

4. Check Other Devices

To help troubleshoot the problem we should check if other devices can connect to the wireless network.

5. Check Environment

If other wireless devices are connected to the network and functioning properly, chances are the router is OK. It's possible there is an environmental issue. Do you have a portable wireless device (Smart Phone, Tablet, Laptop, etc.) that you can put in the same area to test and see if that device's wireless connection still functions as intended in that location?

6. Power cycle

If you haven't already, please try power cycling the device you're working with. To do so, simply turn it off, wait 30 seconds and turn it back on again.

7. Incompatible Routers

At this time, Pioneer has not indicated that there are any compatibility issues with specific models of networking equipment on the market. To ensure that your specific networking equipment and all settings will work properly with your Pioneer VSX-LX102, please reach out to the manufacturer directly for further assistance.

Some routers broadcast guest networks that your device may not be able to connect to depending on your router's settings.

8. What's next?

9. Range Check

The device needs to be within a reasonable range of the router in order to connect and have the best connection speeds.

  • In general, in most homes, you can be up to 30 feet from your router for a decent connection.
  • From 30' to 50' away, the speeds will be slower, and may drop occasionally, but it should be usable.
  • Greater than 50' away, and the signal will most likely be too weak to overcome interference. The speeds will be slow, and the connection may be sporadic.

The above numbers are approximates only. Optimal range may vary based on router make and model.

10. What's next?

11. Relocate Router Check

Your router may need to be relocated to a more centralized location in order to provide better coverage for all your devices.

Good Placement

A house, separated into rooms detailing how placing Wi-Fi in the center of a house will provide better coverage to reach all devices. Diagram.

Bad Placement

A house, separated into rooms detailing how placing Wi-Fi in the corner of the house can cause some devices to not have a Wi-Fi signal. Diagram.

12. Router Relocation

Since this appears to be a range issue that can be resolved by putting the router in closer proximity to the device's intended use area, we recommend moving the router to a more centralized location.

13. Range Extender

If wireless signal is not reaching your device, and relocating your router or the device itself to be in closer proximity is not possible or doesn't resolve the issue, a great way to boost wireless signal without replacing existing equipment is to acquire and install a range extender. Range extenders work with your existing wireless router as a type of wireless repeater used to expand the reach of wireless signal in your home.

14. What's next?