How to do Installation of Skypoint Link Micro LTE Trail Camera on a Windows PC

Authored by: Support.com Tech Pro Team

1. Introduction

This guide will show you on how to do Installation of Skypoint Link Micro LTE Trail Camera on a Windows PC.

2. Resolution

Installation Steps:

1. Make sure to use a Micro SD card class 10/U1 up to 32GB.

2. Format the micro SD card.

3. Download the update file from our website.

4. Open the downloaded .zip file by double-clicking on it.

5. Open the camera name folder.

6. Copy all the files from the .zip file onto the Micro SD card.

7. Verify the copy has been successful on your Micro SD card.

8. Eject the Micro SD card from the computer.

9. Make sure the camera is turned OFF.

10. Insert the Micro SD card into the camera.

11. Power ON the camera.

12. The camera will run the firmware update by itself for few minutes. («Status» light flashes orange rapidly).

13. Then, it will flash green for a short period.

14. Then, it will flash orange slowly.

15. Then, the camera will restart by itself and it will go through the connection process. («Status» light flashes green).

16. The camera firmware will be up to date.