How to Factory Reset an eero Beacon
Authored by:
Support.com Tech Pro Team
This Guided Path® was written and reviewed by Support.com’s Tech Pro team. With decades of experience, our Tech Pros are passionate about making technology work for you. We love feedback! Let us know what you think about this Guided Path® by rating it at the end.
Introduction
Before You Begin:
Resetting an eero Beacon to its factory default state will clear all network configurations, clear its session and logs, and remove it from your network.
1 Factory Reset
Make sure the eero Beacon has been powered on for at least 45 seconds before performing the factory reset.
- Locate the reset button on the left side of the eero Beacon.
- Press and hold the reset button for 15 seconds or until the front indicator light flashes red then release it.
- When the front indicator light starts flashing blue, the eero Beacon is reset to factory defaults and ready to be set up again.
Was this content helpful?
YesNoBefore You Begin:
Resetting an eero Beacon to its factory default state will clear all network configurations, clear its session and logs, and remove it from your network.
Make sure the eero Beacon has been powered on for at least 45 seconds before performing the factory reset.
- Locate the reset button on the left side of the eero Beacon.
- Press and hold the reset button for 15 seconds or until the front indicator light flashes red then release it.
- When the front indicator light starts flashing blue, the eero Beacon is reset to factory defaults and ready to be set up again.