How to Fix Fail Update Netgear EX2700 WiFi Repeater
Authored by: Support.com Tech Pro Team
1. Introduction
In This Guide
You'll Learn:
- How updating your Netgear range extender works.
- How to resolve problems when attempting to manually update your Netgear range extender.
Before We Begin:
- Have access to your range extender.
- Have access to your desktop or laptop computer.
2. Automatic Firmware Check
By default, your Netgear range extender will automatically check for updates when you log in.
You do not need to make any changes for this to happen, it takes place automatically by default.
3. Power Cycle
- Unplug the Range Extender from the wall.
- Wait ten seconds.
- Plug the Range Extender back in.
- Wait one minute for the Range Extender to start back up fully.
- Make sure your smartphone, computer, or other device has re-connected to your Range Extender's Wi-Fi Network.
4. Factory Reset Check
The next step is to factory reset and re-setup your Range Extender.
You will need to re-setup the Range Extender from the beginning, as if it were new.
We have a guide available to help you through the process.
5. How to Factory Reset Your Netgear EX2700 N300 Wi-Fi Range Extender
Show Me How
Clicking this button will open a new guide that will provide you with steps to resolve your issue.
6. How to Update Your Netgear EX2700 N300 Wi-Fi Range Extender
Show Me How
Clicking this button will open a new guide that will provide you with steps to resolve your issue.