How to Fix Fail Update on YUNEEC Typhoon 4K Drone

Authored by: Support.com Tech Pro Team

1. Introduction

The Yuneec Typhoon 4K drone and its components have a unique firmware updating process. Each component of the drone (the drone itself, the camera, and the remote control) must all be updated separately. At this time there are no known issues that would cause your drone to fail to apply a firmware update, but this guide will demonstrate how to prepare your drone properly to apply a firmware update successfully.

Tools You'll Need:

• Your Typhoon's connection cable.

Supplies You'll Need:

• Zip ties
• Any other consumable supplies
• Comment out supplies section if no supplies are necessary

-->

Before You Begin:

Make Sure You Have Downloaded The Update Completely

• How to Update My YUNEEC Typhoon 4K Drone

-->

2. Properly Prepare Your Drone to Update Firmware

1. Locate the receiver inside the body of the drone and gently pull it out.
   

1. Disconnect the receiver.
   

1. Connect the receiver to the communication adapter.
   

1. Hold the wires to one side and insert the battery.
   

1. Power on your drone.
   

1. Connect the USB to your computer.
   

Re-Attempt the Update Process

Now that your drone has been properly prepared to be updated, attempt to apply the firmware update again.

Your Yuneec Drone's firmware is ready to be updated

• How to Update My YUNEEC Typhoon 4K Drone