How to Pair New Remote with YUNEEC Typhoon 4K Drone

Authored by: Support.com Tech Pro Team

1. Introduction

In This Guide

You'll Learn How To:

• Connect your Yuneec Typhoon 4K to its ST10+ Personal Ground Station (Remote Control), known as Binding.

Before We Begin:

• Have your drone unboxed and charged.

2. Binding the Remote Control

Your ST10+ Personal Ground Station and Typhoon 4K should be automatically be bound together. In the case that you lose your connection, you can easily re-bind your remote control and drone by following these instructions.

Always turn the ST10+ on and allow it to boot up before turning Typhoon on and always turn your Typhoon off before turning off the ST10+.

Bind Your ST10+ Personal Ground Station

1. Power on your ST10+ and allow it to fully boot up.
   

1. Power on your drone afterwards by switching the on button on the bottom of the drone.
   

1. While holding the drone, gently tilt it forward twice. This will start the binding process.
   

1. The LED indicator will begin flashing orange rapidly.
   

1. On your ST10+ remote, tap Flight Settings.
   

1. Tap OK.
   

1. Tap Bind.
   

1. Select your drone from the list. In this case, it will begin with SR12S.
   

1. Tap OK once the connection is established.
   

1. Select the camera, in this case CGO2.
   

1. Tap OK once the connection is established.
   

1. Tap the Back button twice to complete the process.
   

3. What's next?

4. How to Set Up Your YUNEEC Typhoon 4K Drone

Show Me How

Clicking this button will open a new guide that will provide you with steps to resolve your issue.