How to Set Up a C by GE Smart Light Switch

Authored by: Support.com Tech Pro Team

1. Introduction

This guide will help you set up your C by GE Smart Light Switch to be able to control your lights remotely with the C by GE app or with your voice only by speaking to a virtual assistant.

What You'll Need:

• A WiFi network to be already set up in your home.
• A phone or tablet with Bluetooth 4.0 capability.

Before You Begin:

You must have the smart switch already installed on your wall. Please have a professional install it if you are not comfortable doing it on your own.

You must have the C by GE app installed

• How to Install the C by GE App

2. Smart Switch Setup

Make sure Bluetooth is enabled on your phone or tablet and you are within 40 feet of the C by GE smart light switch.

1. Launch the C by GE app on your phone or tablet.
   

1. Tap Add in the top right corner.
   

1. 
   
2. Then tap Add New Devices.
   

1. Select C-Start Switches.
   

1. You'll be shown a summary of the setup process. At this point, the smart switch should already be installed on your wall. Tap Get Started.
   

1. Once the switch is powered on, it will go into setup mode and display a blue light ring. Tap Continue when you see that light.
   

1. Select the smart switch from the list. The blue light ring will blink green to indicate you've connected to it. Select Continue to proceed.
   

1. Select your WiFi network from the list and tap Continue.
   

1. Enter your WiFi password if required to continue.
   

1. Now select the room where the smart switch is installed and tap Next.
   

1. Give the switch a name then tap Continue.
   

1. Scroll through the bulb categories and select the type of bulbs the switch will control then tap Continue.
   

1. Tap Done to finish, or Set Up Another Switch if you have another one to set up.