How to Set Up a C by GE Smart Plug

Authored by: Support.com Tech Pro Team

1. Introduction

This guide will help you set up your C by GE Smart Plug to be able to control your lamps and appliances remotely with the C by GE app or with your voice only by speaking to a virtual assistant.

What You'll Need:

  • A WiFi network to be already set up in your home.
  • A phone or tablet with Bluetooth 4.0 capability.

Before You Begin:

You must have the C by GE app installed

C by GE Logo.

2. Prepare C by GE Smart Plug for Setup

  1. Plug the C by GE smart plug into an electrical outlet.
C by GE Smart Plug plugged into electrical outlet.
  1. The LED light should blink blue indicating it is ready for setup.
LED light pointed out on C by GE Smart Plug.

3. C by GE Smart Plug Setup

Make sure Bluetooth is enabled on your phone or tablet and you are within 40 feet of the C by GE smart plug.

  1. Launch the C by GE app on your phone or tablet.
C by GE App.
  1. Tap Add in the top right corner.
Add sign highlighted in C by GE app.

  1. Then tap Add New Devices.
Add New Devices option highlighted in C by GE app.
  1. Select Plugs.
  2. Select the Smart Plug from the list.
  3. Select your WiFi Network from the list and tap Continue.
WiFi network list and Continue button highlighted on network selection screen of C by GE app.
  1. Enter your WiFi Password if required to continue.
WiFi password entry field highlighted in C by GE app.
  1. Now select the Room where the smart switch is installed and tap Next.
Room list highlighted on room selection screen of C by GE app.
  1. Give the plug a Name then tap Continue.
  2. Tap Done to finish, or Set Up Another Plug if you have another one to set up.