How to Set Up a Sengled Smart LED Smart Switch

Authored by: Support.com Tech Pro Team

1. Introduction

This guide will help you setup and add a new Sengled bulb to your Sengled Element hub.

Tools You'll Need:

• A paperclip
• iPhone charging cable
• Access to a computer with iTunes installed
• Any other non-consumable tools needed
• Comment out tools section if no tools are necessary

-->

Supplies You'll Need:

• Zip ties
• Any other consumable supplies
• Comment out supplies section if no supplies are necessary

-->

Before You Begin:

Install Sengled Home App and Setup Hub
You will need to have the Sengled Home app setup on your smartphone or tablet, and have your Element Hub setup and ready.

• How to Install the Sengled Home App
• How to Set Up a Sengled Smart LED Smart Hub

Supported Hub

This guide will help you get your Element Smart Switch on your Sengled Element Hub.At this time, there are no guarantees the Element Smart Switch will work with another smart hub.

2. Prepare Switch

The Smart Switch only allows one minute to pair it with your Hub. Do not remove the small tab that keeps the battery disconnected till you are ready.

1. Open the Sengled Home app, and select Devices at the bottom.
   

1. Select the + Add button on the top right, then select Smart Light Switch.
   

1. Remove the tab from the battery on the back of your switch.
   

1. Follow the instructions on your smartphone or tablet to complete the setup of your Smart LED Switch.