How to Set Up an Under Armour Band Fitness Tracker

Authored by: Support.com Tech Pro Team

1. Introduction

The Under Armour Band is the HTC Grip reborn. The US sports giant's first wearable was delayed from launch in 2015. But now it's back with a new look.

This guide will help you though the setup of your Under Armour Band.

2. Install Android App

1. Launch the Play Store on your mobile device.
   

1. Tap in the search box at the top of the screen.
   

1. Search for "under armour record" and tap on the found app.
   

1. Tap Install and then Open to use it.
   

3. Setup UA Record App

1. Launch the UA Record app from the home screen.
   

1. 
   
   
2. Select Log In or Get Started if you do not already have an existing Under Armour account connected to social media.
   

1. 
   
   
2. If you have just created an account, the app will ask you some basic questions regarding your fitness goals and desired uses for the UA Record app. Answer these according to your own personal preferences.
3. Upon completion, you will be presented with the main screen of the UA Record app.
   

4. Pair with UA Record

1. Ensure that your mobile device's Bluetooth feature is turned ON.
2. Place your UA Band near your mobile device (within 10 feet).
3. Launch the UA Record app on your mobile device.
   

1. 
   
   
2. From the main screen of the UA Record app, select UA Sync.
   

1. 
   
   
2. Select UA Band from the device list.
   

1. 
   
   
2. Select Connect.
   

1. 
   
   
2. Follow the on-screen instructions. Select Continue.
   

1. 
   
   
2. The UA Record app will begin searching for and ultimately pair with your UA Band.
   

1. 
   
   
2. Your UA Band should now be paired and is ready to use with UA Record on your mobile device. Syncing will take place automatically with the UA Record app as long as Bluetooth is turned ON on your mobile device and the UA Band is in-range (within 10 feet).

5. Firmware Update

1. On your phone, open the UA Record app.
   

1. 
   
   
2. On the main screen of the UA Record app, tap Sync.
   

1. 
   
   
2. Under My Apps & Devices, tap Band.
   

1. 
   
   
2. Tap Software Version.
   

1. 
   
   
2. When an update is available, tap Install.
3. Wait for the transfer progress to finish, which may take a couple of minutes.
   While the update is in progress, the pairing between your phone and UA Band will be temporarily disconnected.
4. You'll see a confirmation when the update is complete

6. Install IOS App

1. Launch the App Store on your mobile device.
   

1. Tap Search in the bottom right corner.
   

1. Search for "under armour record" and tap on the found app.
   

1. Tap Get and Install, then Open to use it.