Use the scroll wheel or the quickselect buttons to select Bluetooth.
With Bluetooth selected, press Option on your remote.
The AVR will enter pairing mode.
5. Enable Bluetooth
Open Settings.
Select Bluetooth.
Ensure that the Bluetooth toggle is in the On position.
6. Connect Bluetooth
Some Bluetooth accessories are configured with a PIN or a passkey that is often listed in its information manual. Check your Bluetooth accessory documentation for the correct PIN or passkey.
From any iOS device (iPod, iPad, iPhone):
Open Settings
Then Bluetooth.
Set the Bluetooth accessory in pairing/discovery mode.
Wait for your iOS device to display the detected Bluetooth accessory.
Select the Bluetooth accessory to pair it with the iOS device.
If there is a passkey, put it in.
If there is no passkey then your Bluetooth accessory should be paired now.
7. Enable Bluetooth
Swipe down from the top of the screen.
Tap the Bluetooth icon to enable it.
Bluetooth Enabled
Bluetooth Disabled
8. Connect Bluetooth
Depending on what device (Smartphone or Tablet) and which generation you have, the menu theme and options might look slightly different on your screen. However, the steps should be similar to all Android devices and generations.
From any Android Device
Open the App Drawer.
Newer versions of Android's operating system may not have the app drawer button. If you do not see the button, you will simply swipe up from the bottom of your screen to get to your apps.
Go to Settings.
Tap Bluetooth. You may need to select Connections first.
Set the Bluetooth accessory in pairing/discovery mode. This process will vary depending on what kind of device you have. Refer to your device's documentation for specifics on how to accomplish this.
Ensure Bluetooth is On and then select your device from the list below.
Some Bluetooth accessories are configured with a PIN or a passkey that is often listed in its manual. Check your Bluetooth accessory manual for the correct PIN or passkey.
.png)
