How to Use Home Connect App with a Bosch Dishwasher
Introduction
- Basic use of your Bosch Dishwasher with the Home Connect app
- Have your tablet or smartphone available
- Have the Home Connect app installed on your smartphone or tablet
- Be near your Bosch 800-Series Dishwasher
1 App Check
In order to connect and use your Dishwasher on Wi-Fi, you will need the Home Connect app.
? Do you have the Home Connect app installed?
- Basic use of your Bosch Dishwasher with the Home Connect app
- Have your tablet or smartphone available
- Have the Home Connect app installed on your smartphone or tablet
- Be near your Bosch 800-Series Dishwasher
In order to connect and use your Dishwasher on Wi-Fi, you will need the Home Connect app.
You have many options available to control your Dishwasher using the Home Connect app.
- Open the Home Connect app.
- Select your Dishwasher.
- Select Manual Wash at the top.
- Here you can adjust the washing method, options, and when the wash starts.
You can move back and forth between each of these sections easily using the < Left and Right > arrows at the bottom.
Once everything is set, select Done from the menus, then select Start.
You can always discover more information, features, and options of your Bosch appliance and the Home Connect app by visiting home-connect.com with your browser.
Easy Mode takes care of most of the settings for you, instead just asking a few simple questions about the type of dishes you have loaded.
- Open the Home Connect app.
- Select your Dishwasher.
- Select Easy Wash at the top.
- Select what type of dishes you have loaded, then select Right >.
- Select the option you want your dishwasher to focus on, and select Right >.
- The app will figure out the best options for you, and show the result. Select Start to start washing your dishes.
Your dishwasher has a set of lights to indicate when it's running that can be matched to your kitchen's decor.
- Open the Home Connect app.
- Select your Dishwasher.
- Select the Ambient Light option on the top left.
Your dishwasher stores the detergent tablets inside, and dispenses them for each load automatically, so you can't forget to put the soap in. It will notify you, as well, when it starts running low, letting you know to pick up or order more before you run out.
- Open the Home Connect app.
- Select your Dishwasher.
- Select the Tablet Counter option on the top left.
- Make sure the Tablet Counter is turned on with the switch on the top left.
- Here you can set the number of tablets remaining, how large each box of tablets you purchase are, and when to notify you if they're running low.Don't forget to select OK at the bottom when you're done to make the setting take effect!
Clicking this button will open a new guide that will provide you with steps to resolve your issue.