How to Use Sengled Boost Smart Lights

Authored by: Support.com Tech Pro Team

1. Introduction

Your Sengled Boost bulb provides a convenient Wi-Fi range extender and lighting solution in one package, letting you extend your home's Wi-Fi signal further out and providing some smart lighting at the same time. This guide will help you understand adjusting the lights and settings of your Boost bulb.

Before You Begin:

Sengled Boost App
You will need to have the Sengled Boost app installed on your smartphone or tablet to use the features of your smart light.

• How to Install the Sengled Boost App

2. Basic Lighting Control

Remember to leave your light on at the power switch at all times! The Wi-Fi extender needs power, and lighting is controlled through the app.

Adjust All Lights

Adjust Brightness

Use the outer ring to adjust how bright or dim the light is.

Turn On/Off Lights

Use the Power Button at the bottom center to turn on or off all your Boost bulbs.

Adjust Individual Lights

Select Single Bulb at the bottom to access the individual controls for your bulbs.

Adjust Brightness

Use the Slider to adjust how bright or dim the light is.

Turn On/Off Lights

Use the Power Button on the left to turn on or off each your Boost bulbs.

3. Adjust Wi-Fi Extender Settings

1. Open the Sengled Boost app, and select Single Bulb at the bottom.
   

1. Select the gear icon to the right of the bulb you want to change.
   

Adjust the settings here as you need.

Name

Change the name of the Wi-Fi network for this range extender. This can make it easier to find for your other devices.

Keep Last Brightness

When turned on, the bulb will remember what brightness level you last set it to, and will always turn on at that brightness. Otherwise, it will default to 100% each time you turn the bulb on.

Security Mode

Turns on or off the need to put a password in for the extended network.

It is highly recommended to keep this turned on, so other people can't log onto your home network without asking you first.

Password

The password for this bulb's extended Wi-Fi network.

Remove from the Network

Disconnects the bulb from your home network and factory resets it.

This will remove all settings on your bulb, and you will need to re-setup from the start.

If you reset the bulb, it can take several minutes to factory reset. Do not power off the bulb during this time.