How to Use Sony RF995RK Wireless Headphones
Authored by: Support.com Tech Pro Team
1. Introduction
This will guide you through the basic use of your Sony RF995RK Wireless Home Theater Headphones.
2. Turn On
The Power switch is on the bottom back of the left ear cup, just underneath the little bump to guide your hand.
3. More Information
Visit https://www.sony.com/electronics/headband-headphones/mdr-rf995rk on your computer for more information about your headphones.
4. Adjust Volume
The volume slider is on the back of the right ear cup. There's a small tactile bump to indicate full volume.
5. Charge
- Place the headset on the base stand, so the contacts meet at the top.
- Double-check your placement at the top, and make sure the red charging light turns on.
- Once the headset reaches a full charge, the red charging light will turn off.
6. Clear Voice
Switch on or off the Voice switch on the very bottom of the right ear cup.
7. Change Earpads
- Have your new ear pads ready.
- Carefully pull the ear pad out of the groove on the housing.
- Make sure the new ear pad is vertical, and work the ear pad around the housing, back into the groove.
8. Change Channel
If your headset has interference, it can help to change the channel it uses.
- Change the channel on the base station.
- Press the auto tuning button on the bottom of the right ear cup.