Introduction
Before You Begin:
Supported Devices
Sylvania offers a number of different products, each with a slightly different way they are used.
We offer guides for the following hubs to add your Zigbee bulbs to directly.
Supported Apps
This guide covers using the Sylvania Smart Home app. It is entirely possible to use your bulbs without Sylvania's app. If you are using one of the other major systems to control your bulbs, we have guides available to help with those apps, instead.
If you setup or use Google Home or Google Assistant automation most often, it may be best to stick with the Google Home app.

If you setup or use Google Home automation most often, you may want to use the HomeKit app instead.
If you setup or prefer using your Alexa or Echo system to control your lights, you can use the Alexa app.
1 Add a Group
The Sylvania Smart+ app is group-based, meaning it relies on you setting up groups, or rooms, to control your devices together in each room you setup.
- Open the Sylvania Smart+ app, and select + Add A Group at the top.
- Either enter a name for your new room, or select one from the list.
- Once added, you'll be taken to your now empty group, ready to add a light.
2 Add a Light
Once you have your groups, or rooms, setup, you can add your lights.
- Open the Sylvania Smart+ app, and select Devices for one of your groups.
- Screw in your light bulb, and turn on the power.
- Your light should flash to indicate it's reset, and ready to pair.
Color Bulb Color bulbs will flash blue, red, green, then white to indicate it's ready to pair.
White Bulbs White bulbs will flash dim and bright a few times to indicate it's ready to pair.
If your lamp doesn't flash
Reset your bulb by turning it off, then on again five times rapidly. - Select + Add A Device.
- The app will scan for your new bulb. Follow the instructions on screen to complete adding your new bulb.
3 Control Lights
The Sylvania Smart+ app allows you to adjust a whole room of lights, or each light individually.
Adjust Entire Room
Adjust Individual Light
- Select Devices in the room where your light is located.
- Select the device you'd like to adjust.
- Use the color diamond, brightness slider, on and off to adjust your light. The toggle on the top-right lets you choose between a full color diamond and a white balance diamond.
Was this content helpful?
YesNo
Before You Begin:
Supported Devices
Sylvania offers a number of different products, each with a slightly different way they are used.
We offer guides for the following hubs to add your Zigbee bulbs to directly.
Supported Apps
This guide covers using the Sylvania Smart Home app. It is entirely possible to use your bulbs without Sylvania's app. If you are using one of the other major systems to control your bulbs, we have guides available to help with those apps, instead.
If you setup or use Google Home or Google Assistant automation most often, it may be best to stick with the Google Home app.

If you setup or use Google Home automation most often, you may want to use the HomeKit app instead.
If you setup or prefer using your Alexa or Echo system to control your lights, you can use the Alexa app.
The Sylvania Smart+ app is group-based, meaning it relies on you setting up groups, or rooms, to control your devices together in each room you setup.
- Open the Sylvania Smart+ app, and select + Add A Group at the top.
- Either enter a name for your new room, or select one from the list.
- Once added, you'll be taken to your now empty group, ready to add a light.
Once you have your groups, or rooms, setup, you can add your lights.
- Open the Sylvania Smart+ app, and select Devices for one of your groups.
- Screw in your light bulb, and turn on the power.
- Your light should flash to indicate it's reset, and ready to pair.
Color Bulb Color bulbs will flash blue, red, green, then white to indicate it's ready to pair.
White Bulbs White bulbs will flash dim and bright a few times to indicate it's ready to pair.
If your lamp doesn't flash
Reset your bulb by turning it off, then on again five times rapidly. - Select + Add A Device.
- The app will scan for your new bulb. Follow the instructions on screen to complete adding your new bulb.
The Sylvania Smart+ app allows you to adjust a whole room of lights, or each light individually.
Adjust Entire Room
Adjust Individual Light
- Select Devices in the room where your light is located.
- Select the device you'd like to adjust.
- Use the color diamond, brightness slider, on and off to adjust your light. The toggle on the top-right lets you choose between a full color diamond and a white balance diamond.
